NEW TECHNOLOGICAL SOLUTIONS BASED ON LOCAL RESOURCES IN THE DEVELOPMENT OF ANTI-CORROSION POLYMER-BITUMEN COATINGS

Isroilov  Y.Y.

Authors

Isroilov Y.Y. Master's student of the department "Oil and gas work and their processing technology", Karshi State Technical University, Uzbekistan. Karshi city

Keywords:

polymer-bitumen composites, anti-corrosion coatings;, local raw materials, bitumen modification; polymer modifiers;, oil residues

Abstract

This study is devoted to modern technological solutions for the development of anti-corrosion polymer-bitumen coatings based on local raw materials. It was found that the harmonious combination of polymer modifiers, oil residues and mineral additives in improving the physicochemical properties of bitumen has a significant impact on the structural stability, hydrophobicity and electrochemical protection of the coating. As part of the study, the structural properties of local bitumens were analyzed and the optimal parameters of the modification process - mixing speed, temperature regime and polymer concentration - were determined. Laboratory tests showed that the adhesion of polymer-bitumen composites to the metal surface increased, the penetration of ions that initiate corrosion decreased, and the mechanical stability of the coating increased. The results obtained confirm that the use of local resources is an important scientific and practical basis for diversifying the technology for the production of economically efficient, environmentally friendly and anti-corrosion coatings.

References

Sabergaliyev, M., Yeligbayeva, G., Khassanov, D., Muradova, S., Orazalin, Z., Ainakulova, D., Sharipov, R., & Negim, E.-S. (2024). Modified bitumen-polymer mastic to protect metal coatings from corrosion. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 331(4), 12–20. (https://kims-imio.com/index.php/main/article/view/406)

Makhmetova, A., Negim, E.-S., Ainakulova, D., Yeligbayeva, G., & Khatib, J. (2023). An Overview of Epoxy Resins as coating to protect metals from corrosion. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 328(1), 20–32. (https://kims-imio.com/index.php/main/article/view/303)

Yeligbayeva, G., Khaldun, M. A., Alfergani, A. A., Tleugaliyeva, Z., Karabayeva, A., Bekbayeva, L., Zhetpisbay, D., Shadin, N., & Atabekova, Z. (2023). Polyurethane as a versatile polymer for coating and anti-corrosion applications: A review. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 331(4), 21–41. (https://kims-imio.com/index.php/main/article/view/402/427)

Petrunin, M. (2022). Advances in Anti-Corrosion Polymeric and Paint Coatings on Metals: Preparation, Adhesion, Characterization and Application. Metals, 12(7), 1216. (https://www.mdpi.com/2075-4701/12/7/1216)

Effendy, S., Zhou, T., Eichman, H., Petr, M., & Bazant, M. Z. (2021). Blistering Failure of Elastic Coatings with Applications to Corrosion Resistance. arXiv preprint. (https://arxiv.org/abs/2106.13371)